Housing: Die-cast, low copper (<0.6% Cu) aluminum body, lamp housing, and socket enclosure.
Swivel: Die-cast, low copper (<0.6% Cu) aluminum with locking teeth and 1/2" solid brass NPT mount. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistance.
Lens Frame: Integral die-cast, low copper (<0.6% Cu) aluminum lens ring and glare shield.
Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward
Gasketing: Silicone gaskets used throughout.
Socket: Porcelain medium base.
Wiring: No. 18AWM rated 105°C.
Ballast: High power factor, long range ignitors, -20°F. starting, mounted on tray, 120 Volt standard.
Ballast Box: High temperature, compression molded featuring long-fiber fiberglass impregnated heavy wall construction. Wall separates ballast chamber from splice compartments, splice area 32 cu in.; prewired, two anti-siphon plugs to and from ballast chamber. Conduit entry; two 3/4" NPT for through wiring, one 1/2" NPT for remote access
Ballast Cover: Cast bronze, supplied with 1/2" NPSM for direct mount, with stainless steel set screw lock. Flat for remote mount.
Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).
NOTE: Quad tap ballasts are used, wired to the voltage specified.
Optional Shields available.
Optional Colored Lens, Hex Cell Louver, Prismatic Lens and Spread Lenses available.