Housing: Die-cast, low copper (<0.6% Cu) aluminum. Frame with silicone gasket, attaches to housing with four captive 1/4-20 stainless steel, slotted cap screws.
Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward.
Socket: Porcelain medium base.
Wiring: No. 18AWM rated 105°C.
Ballast: High power factor, long range ignitors, -20°F. starting, mounted on tray, 120 Volt standard.
Ballast Box: High temperature, compression molded featuring long-fiber fiberglass impregnated heavy wall construction. Wall separates ballast chamber from splice compartments, splice area 32 cu in.; prewired, two anti-siphon plugs to and from ballast chamber. Conduit entry; two 1/4" NPT for through wiring, one 1/2" NPT for remote access.
Ballast Cover: Cast bronze, supplied with 1/2" NPSM for direct mount, with stainless steel set screw lock. Flat for remote mount.
Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).
Arm: Cast aluminum. Head is independently rotatable 300° vertically from top dead center. Head may be positioned straight up. Horizontal rotation of entire fixture controlled by installation on mounting device. Set screw provided for locking position.
Stem: 1/2" schedule 40 aluminum pipe with K" NPT at bottom plus solid brass locknut for mounting.
NOTE: Quad tap ballasts are used, wired to the voltage specified.
Optional Colored Lens, Hex Cell Louver, Prismatic Lens and Spread Lenses available.