Housing: Die-cast low copper (<0.6% Cu) aluminum body, lamp housing and socket enclosure.
Swivel: Provides horizontal rotation independent of the threaded mount. Swivel locked by 1/4-20 stainless screw set. Die-cast low copper (<0.6% Cu) aluminum with locking teeth and 1/2" solid brass NPT mount. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistance.
Lens Frame: Integral die-cast low copper (<0.6% Cu) aluminum lens ring and glare sheild.
Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff with positioned upward.
Gasketing: Silicone gaskets used throughout.
Socket: Porcelin medium base.
Wiring: No. 18AWM rated 105o C
Ballast: High power factor, long range ignitors, -20o F. starting, mounted on tray, 120 Volt standard.
Ballast Box: High pressure, compression molded featuring long fiber fiberglass impregnated heavy wall construction. Wall separates ballast chamber from splice compartments, splice area 32 cu. in; prewired, two anit-siphon plugs to and from ballast chamber. Conduit e
Ballast Cover: Cast bronze, supplied with 1/2" NPSM for direct mount, with stainless steel set screw lock. Flat for remote mount.
Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR).
NOTE: Quad tap ballasts are used, wired to the voltage specified.
Optional Shields available.