Building-mounted light for entrances, stairwells, corridors and other pedestrian areas. Non-cutoff, and cutoff configurations.
Rugged, corrosion-resistant, die-cast aluminum back housing and hinged door frame. Castings are sealed with a one-piece gasket to inhibit the entrance of contaminants. Dark bronze housing configured for mounting directly over a standard 4" outlet box or for surface wiring via any of three convenient 3/4" threaded conduit entry hubs. Anodized aluminum reflector.
Ballast — Quad-tap, pulse start, 100% factory-tested, high power factor for 250W MH and 400W MH. Meets or exceeds the minimum efficiency required by the Energy Independence and Security Act of 2007 (EISA). Quad-tap, high-reactance, high power factor ballast for 150W. Socket — Mogul-base socket for 250W and 400W MH. Medium-base socket for 150W.
Listed and labeled to UL standards for wet locations. 25°C maximum ambient temperature.
Fixtures are covered by Lithonia Lighting 24-month warranty against mechanical defects in manufacture. Note: Specifications subject to change without notice.
- Pallet Quantity: 36
- Warranty: 2 Years